Water Maintenance
-
Jet Line Cleaner - 1pt
Over time, even a well maintained spa or jetted bathtub will accumulate unseen, bacteria breeding deposits in the plumbing lines. While chemicals keep your spa water clean, they are ineffective in dissolving dirt, soap, and mineral deposits hidden within your plumbing. HT Jet Line Cleaner rids your plumbing lines of bacteria but unlike other less advanced formulas it is effective in cleaning jet bodies and does not require you to drain and fill your spa twice. Using Jet Line Cleaner each time you drain and fill your hot tub will help protect your pump seals and heater element. RECOMMENDED USE 1. Remove and clean filter and keep outside of spa 2. Before you drain your spa add 16 oz. of Jet Line Cleaner to warm water 3. With filter out, turn pump(s) on and run jets for 15 minutes 4. Turn pump(s) off and let it sit for 1 hour 5. Drain spa and while draining hose off all side walls 6. Refill spa according to directions NOTE: Some residual foaming may occur. If so, use foam away to suppress. For Jetted bathtubs holding less than 15 gallons use 8 oz.
$17.99
-
Filter Cleaner - 1qt
This is an enhanced formula, unlike other competitive products on the market. Keep out of reach of children and avoid splashing it on surfaces such as linoleum or tile. The use of HT Filter Cleaner will effectively break down the body oils, grease, soap film, calcium deposits, and other contaminates on your filter cartridge. The result will be an improved filter efficiency and an extended life to your cartridge. Regular use of this product will assure proper filtration. RECOMMENDED USE Mix 8 oz of Filter Cleaner per 1.25 gallons of clean water in a large plastic container that will hold enough water to cover the filter(s) you wish to soak. Always add Filter Cleaner to the water not the reverse and never use a metal container with Filter Cleaner. Place cartridge(s) fully immersed in the solution and allow 10 to 12 hours to soak. Remove cartridges and rinse thoroughly with clean water. Place on a shelf and allow cartridges to air dry before reinserting them into your spa. To avoid down time on your spa and to extend the life of your filter(s) it is recommended to have a spare set of filters. NOTE: Dirty filters restrict water flow and performance of your jets along with causing pumps to fail. You should clean your filters each time you change your water and once every two weeks clean them with Instant Cartridge Cleaner.
$17.99
-
All Purpose Cleaner - 1qt
HT All Purpose Cleaner is specially formulated to easily remove stubborn deposits on acrylic spas and pool surfaces without altering the water chemistry, pH levels, or causing any foaming in the water. It is also ideal on faux wood spa cabinet panels, plastic steps, and even most outdoor furniture, boat, car, and bath products. Includes spray attachment. RECOMMENDED USE Simply spray and wipe clean. For stubborn deposits on the acrylic allow to sit for 5 minutes then scrub, rinse, and wipe clean. Recommended to be used with our spa scrubbing brushes. NOTE: This is an earth friendly, biodegradable product that contains no soap, detergent, alcohol, or phosphates.
$16.99
-
Instant Cartridge Cleaner - 1qt
HT Instant Cartridge Cleaner quickly removes scum, oils, minerals, and scale from cartridge filters. This special liquid formula is a heavy concentrate that works in minutes, requires no scrubbing, and allows you to continue to enjoy your spa without delay. RECOMMENDED USE Simply remove the cartridge filter and rinse it thoroughly with a pressure activated garden hose. While wet, spray on Instant Cartridge Cleaner on the entire surface and allow 3 to 5 minutes to set. Rinse thoroughly and reinstall cartridge filters into spa. NOTE: Use of the Filter Flosser makes cleaning your filter easy and more effective. Approximately every 3 months thoroughly clean your filters by soaking them for 10 to 12 hours in Filter Clean solution. Proper care of your filters will save you money by extending their life. Remember: Dirty filters restrict water flow and performance of your jets along with causing pumps to fail. You should clean your filters each time you change your water and once every two weeks clean them with Instant Cartridge Cleaner.
$18.99
-
Cover Conditioner - 1pt
HT Cover Conditioner protects and extends the life of your cover. Exclusively formulated to effectively clean and restore the luster to vinyl and other hard surfaces. This unique product keeps the vinyl from hardening and cracking, particularly covers exposed to the harsh ultraviolet rays of the sun and other harmful outdoor elements. NOTE: Traditional household vinyl cleaners like Amoral will damage and discolor any cover vinyl skin, voiding your warranty.
$19.99