Water Treatment

HT Stain & Scale is a very effective in inhibiting the formation of rusty, green, brown, or cloudy water. This discoloration is primarily due from the presence of metallic or mineral impurities, such as copper, iron, and manganese salts in your water supply or the result of corrosive action of acidic water (low pH). Warning: excessive scaling within your water could cause corrosion of your heating element and discoloration of the spa acrylic surface. Proper use of Stain & Scale in cooperation with Protection Plus protects your spa and equipment. RECOMMENDED USE: Each time you refill your spa add 16 oz of HT Stain & Scale on spas up to 500 gallons. Stain & Scale should be added while you are filling the spa. Within 24 hours of adding the 16 oz of Stain & Scale you should remove and clean your filter cartridges. For spas with high concentration of minerals or those showing signs of rusty water or scaling be sure to follow a maintenance program of adding 1 oz of Stain & Scale per each 100 gallons of water each week.

Read more less

Protection Plus is a concentrated stain and scale preventer in the spa and helps prevent calcium build up on acrylic spa surface, along with helping to keep your water crystal clear. RECOMMENDED USE Add 1 oz of Protection Plus once a week for proper maintenance and stain and scale prevention. For spas with any concentration of minerals it is recommended to add 16 oz of Stain & Scale each time you fill your spa with fresh water.

Read more less

HT Natural & Clear is a natural enzyme that emulsifies and biodegrades organics (body oils, suntan lotion, etc.) as soon as they enter your spa helping to keep your water crystal clear with no discomfort to the spa user. By removing these organics Natural & Clear helps your sanitizer work more efficiently and reduces the amount of sanitizer required to maintain a proper ppm level. Natural & Clear also helps rid your spa of common scum lines caused by contaminants. NOTE: Most competitors sell Clarifiers that are coagulates that group small particles (less than 15 microns) together making them available for your filter to capture. These less expensive formulas are not natural enzymes, are less effective, and do not help rid your spa of scum lines.

Read more less

HT Foam Away breaks up existing foam instantaneously in spas, hot tubs, and whirlpools. HT uses a specially formulated high concentration that requires so little to be effective that it can best be used with a spray applicator targeting only the foaming areas. RECOMMENDED USE To Prevent Foaming: shake well and disperse no more than a capful of Foam Away onto the surface of the water. To Eliminate when foaming occurs: shake well and disperse one capful where foaming exists or use a spray activator lightly on surface of water. If foaming persists after 30 minutes repeat procedure.

Read more less